|
|
|
|
Order Nr #T0419
|
NINJA JET ARTF
|
|
|
|
|
|
|
|
 A real speedmonster with serious power !
With the popular Apollo brushless motors it has become possible to develop some serious power... The Ninja Jet is engineered to harness this power and convert it into plenty of forward motion.
The model is built up from precision laser cut wood parts making it a very light and agile aircraft that flies as it were on rails. The lift surface is sufficient to make approaches and landings non-critical while the airfoil will guarantee lots of speed.
The futuristic look adds to the attractive nature of this pure bred speedmonster and make it look like it’s already doing 100km/h while it is still on the workbench.
|
|
|
|
|
|
Wingspan
Length
Wing Area
Weight
Motor
|
: 910 mm
: 870 mm
: 16,4 dm˛
: 1030 g
: MC28-3009
|
|
FUNCTIONS
Rudder
Elevator
Ailerons
Motor
|
|
|
|
|
|
|
Ready built and Oracover covered laser cut fuselage, wing and tail parts, pre-bent landing gear, wheels, all accessories and clear building instructions in English, German, Dutch & French.
|
|
|
|
|
APOLLO BRUSHLESS MOTOR
|
Voltage Range
|
: 7,4 V- 11,1 V
|
Dimensions
|
: 28x30 mm
|
|
# Li-Po
|
: 2-3
|
Weight
|
: 54 g
|
|
RPM/V
|
: 1280
|
Shaft Diameter
|
: 3,2 mm
|
|
Propellor
|
: 8x6
|
Max. Load Current
|
: 18 A/60 sec
|
|
Max. Thrust
|
: 0,85 kg
|
Max. Power
|
: 200 W/60 sec
|
|
|
|
APOLLO BRUSHLESS ESC 25A
|
Input Voltage
|
: 5 V~12 V
|
Continuous current
|
: 25 A
|
|
# of cells
|
: 6-10
|
Peak current
|
: 35 A
|
|
# Li-Po
|
: 2-3
|
BEC
|
: 5V 3A
|
|
Brake
|
: YES
|
Weight (+wires)
|
: 23 g
|
|
Soft start
|
: YES
|
Dimensions
|
: 47x22x7 mm
|
|
|
|
|
Order Nr
|
# T0221.35M1
# T0221.35M2
# T0221.41M1
# T0221.41M2
|
|
AVENGER 4 4-CHANNEL FM RADIO
Modern styled 4-channel digital proportional radio controlled system, suitable for all kind of indoor & parkfly models as well for medium sized electric powered models. The radio features servo reverse function on all 4 channels, a charge socket and flight simulator socket. The transmitter can be used as control system for the flight simulator REFLEX XTR, etc... This radio set is supplied with a long range 5 channel micro receiver and 3xB160 7.5g micro servos suitable for most models.
|
|
|
PROTECH SERVO B-205 (3pcs)
Micro servo for use in the smallest models, indoor & parkflyers and small electric powered helicopters.
|
Input Voltage
|
: 4,8 V ~6,0 V
|
Speed
|
: 0,21s/60° @ 4,8 V
|
|
Weight
|
: 9,8 g
|
Dimensions
|
: 22x12x20,5 mm
|
|
Torque
|
: 1,7 kg/cm @ 4,8 V
|
|
|
|
|
|
FLIGHTPOWER EVO 20 BATTERYPACK
This is part of the comprehensive 25C - 40C lineup of FlightPower EVO20 packs that range from 300mAh to 7400mAh in Capacity and 2s to 12s
(7.4V nominal to 44.4V nominal) in Voltage.
|
|
|
APC PROPELLER 8x6
APC propellers are injection molded using a pair of mold halves. Computer driven CNC milling machines generate the molds. The mold halves must match each other precisely at the parting lines. The design of the computer software used to define airfoils and CNC motion dominantly reflects parting line driven requirements. The parting line must be very precise and continuous around the entire perimeter of the mold cavity to allow precision molding of the very thin airfoils used on many of the APC propellers.
|
|
|
|
|
|
|
|
We have just launched our NEW PROTECH® forum !!!
So if you have any questions or need help with one of our products, please visit our NEW forum and post your question.
|
For spare parts visit your local Protech dealer. If you can’t find your spare parts at your local dealer, please order here.
|
Looking for a Protech dealer ?
Click the map below !
 |
|
|
|
|
Protech bvba | Geelseweg 80 - 2250 Olen - BELGIUM | Phone : +32 (0)14 25 92 83 | Fax : +32(0)14 22 17 00 | Email : info@protech.be
|
|
|
